SERVICE MANUAL
© ISA, s.r.o. 2014-2015. All rights reserved.
We reserve the right to change the specification without prior notification.
Always check for new version of this document@
Service manual V1.08 | Nov-2015 | LM0002-EN
Page 84 of 97
5.6.8
App settings
5.6.8.1
Password
Password screen is used for changing password to LVLØ system.
Changing password procedure:
1.)
Type old password
2.)
Type new password
3.)
Retype new password
4.)
Save
Default password for user “LVLØ” and “LVLØservice” is 123456. It is strongly
recommended to change this password. Please store password on secure
place. After password change, system will automatically restart, please
reconnect with new credentials.
5.6.8.2
External address
For access from internet, it is possible to define external fixed URL which will be stored in LVLØ system.
Please use following format: pool.mydomain.com:port or <IP ADRESS>:PORT and press SAVE button.
5.6.8.3
Email alert 1
Email section is used for definition of recipients of email alerts generated by LVLØ system. For security
reasons, when changing email address, there is a need to provide old email address. Default email address
is
. Type in the new email address where you would like to receive messages from the
system.
LVLØ system will send emails from address
. We advise to add this address to whitelist or
to accepted domains, to avoid messages to be delivered to SPAM folder.
5.6.8.4
Email alert 2
Email section is used for definition of recipients of email alerts generated by LVLØ system. For security
reasons, when changing email address, there is a need to provide old email address. Default email address
is
. Type in new email address where you would like to receive messages from the system.
LVLØ system will send emails from address
. We advise to add this address to whitelist or
to accepted domains, to avoid messages to be delivered to SPAM folder.
5.6.8.5
Date & Time
In date and time section you can select LVLØ system time and date. If LVLØ is connected to internet, it will
automatically update date and time from time servers. If it is not connected, please setup correct values
here.