ircon Modline 5, Руководство по эксплуатации

Страница: 123 / 156

Maintenance
Modline 5
Rev. L6 Feb 2017
121
For Modline 56 sensors: occasionally, a calibration flag that operates during the Sensor
internal Calibrate test may move into the viewing area during shipment. If this occurs,
the viewing area will be dark and appear obstructed. This flag will be positioned
correctly when power is applied to the Sensor.
The Modline 5 Sensor with Laser sighting option is a Class II Laser product. When restoring a Sensor
with this option back to service, follow the Cautions outlined below and the operating instructions in
Section 5.11
Laser Sighting Operation , page 102 of this manual.
Before turning on the Laser remotely with the DPM Digital Panel Meter Interface or
other devices using RS– 485 Communications, insure there are no personnel in the path
of the beam.
7.3 Servicing
There are no user adjustable controls or serviceable parts within the Sensor Housing. Units must be
returned to the factory for calibration and adjustments. Do not disassemble the unit!
7.4 Factory Calibration and Service
Instruments are calibrated against precision laboratory standards and are "burned in" for before
shipment to ensure accurate temperature measurements throughout the operating range. To preserve
this accuracy, each instrument should be recalibrated periodically on a Blackbody standard. We
recommend recalibration of this type on a yearly basis. There are the following methods of calibrating
IRCON Modline 5 units:

You can have your instruments calibrated at our Service Center. An available option is
calibration traceable to the National Institute of Standards and Technology (NIST).

Field Service Agreements geared to your requirements are also available. Options include
periodic maintenance (with provisions for guaranteed emergency service rates) and field
maintenance with emergency service and parts replacement.
To prevent possible electrical shock, fire, or personal injury have an approved
technician repair the product.