ircon Modline 5, Руководство по эксплуатации

Страница: 63 / 156

Sensor Installation
Modline 5
Rev. L6 Feb 2017
61
The Modline 5 Sensor with the Dirty Window Detector Option (DWD) cannot be
installed in a WJ-5 Jacket because of its additional length.
Figure 53: M5WJ5 – Mounting Kit
Accessories and kit required for mounting Modline 5 Sensor in WJ-5 Water Cooling Jacket:

Model WJ-5 Water Cooling Jacket with Air Purge Supplied with its own mounting
hardware (M5WJ5 Kit is not included.)

UAA Universal Adapter Accessory Supplied with its own mounting hardware

MFL Mounting Flange Large Accessory Supplied with its own mounting hardware

M5WJ5 Mounting Parts Kit: Consisting of the following. (Note: These parts are sold only as a
kit.)
Item Qty. Part Number Description Function
1 1 050501 INST: WJ-5 Rev. C
Complete specifications, cautions and
installation instructions
2 1 482322 Mod 5 WJ5 Spacer Block Spacer between UAA and Plate
3 1 456862 Mod 5 WJ5 Mounting Plate Slides assembly into WJ-5
4 2 202524660 ¼-20 X ¾ inch long Socket Head Cap Screw Mount Spacer Block to UAA
5 4 202524540 ¼-20 X ¾ inch long Hex Head Screw
Mounting Plate to Spacer (2)
Mounting Plate to WJ-5 (2)
6 4 222503030 1/4 in. Split-ring lock washers
Use with ¼-20 X ¾ inch long Hex Head
Screws (4)
Table 13
Assembly and Sighting Instructions:
Refer to Installation Instructions for WJ-5, Included in M5WJ5 Kit
1. Assemble as indicated in drawing to the right and at top of page.
2. Slide assembly into WJ-5 and tighten rear mounting plate screws.
3. Focus Sensor with rear rotating focus section.
4. If looking through a sight tube or sight hole, position, align and rotate the Sensor and Sight tube
to center the reticle or laser image in the field of view.