IP-COM G3210P Скачать руководство пользователя страница 61

Страница: 61 / 138



Advanced Settings

Untagged

Access, Trunk, Hybrid: Not supported.

Manual

Tagged

Access: Not supported.

Trunk: Supported, but the default VLAN of the

access

port must already exist and can’t be voice

VLAN. And the default VLAN is allowed on the

access port.

Hybrid: Supported, but the default VLAN of the

access

port must already exist and can’t be voice

VLAN. And the voice VLAN should be in the

allowed tagged VLAN list.

Untagged

Access: Supported, but the default VLAN of the

access port must be voice VLAN.

Trunk: Supported, but the default VLAN of the

access port must be voice VLAN and voice VLAN is

allowed on the access port.

Hybrid: Supported, but the default VLAN of the

access port must be voice VLAN and exist in

allowed untagged VLAN list.

As for phones which require manually configured IP addresses and voice VLAN IDs, the

matching relationship is relatively simple, for only tagged voice traffic can be sent.

Voice VLAN

Mode

Port Link Type Supporting Details

Auto

Access

Not supported.

Trunk

Supported, but the default VLAN of the access port

must already exist and can’t be voice VLAN. And the

default VLAN is allowed on the access port.

Hybrid

Supported, but the default VLAN of the access port

must already exist and can’t be voice VLAN. And the

default VLAN should be in the allowed tagged VLAN

list.

Manual

Access

Not supported.

Trunk

Supported, but the default VLAN of the access port

must already exist and can’t be voice VLAN. And the

Содержание G3210P











































































































































Результаты поиска

Содержание G3210P

Отзывы:

Похожие инструкции для G3210P

Бренды по названию

Популярные бренды

IP-COM G3210P, Руководство пользователя

Результаты поиска

Содержание G3210P

Отзывы:

Похожие инструкции для G3210P

Бренды по названию

Популярные бренды