IP-COM G3210P, Руководство пользователя

Страница: 55 / 138

50

Advanced Settings
Click Delete behind the corresponding port number.
To batch delete Trunk ports, check ports you wish to delete and click Batch Delete .
Tip:

A port cannot be configured to be the Hybrid port and Trunk port at the same time. If
you want to set a Hybrid port to be a Trunk port, you need to delete Hybrid port
settings for this port first.

Deleted Trunk ports will be assigned to VLAN1 automatically and port link type will be
changed to Access ports.
1.4 Hybrid Port
In 802.1Q VLAN mode, port link type is Access by default. If you want to change the port
link type to Hybrid, click VLAN Management > VLAN Configuration > Hybrid Port to
enter page below:
Add Hybrid ports:
1
．
Click New ;
2
．
Enter the Hybrid port number you wish to within the valid range of 1~10;
3
．
Enter the Hybrid port
’s PVID and verify that the corresponding VLAN has already
existed;
4
．
Configure Tagged VLAN ( range: 1~4094, null);
5
．
Configure Untagged VLAN (range: 1~4094, null);