IP-COM G3210P, Руководство пользователя

Страница: 19 / 138


Installation
14
14
Tip:
The PoE power supply mode is dynamic, i.e. the switch accommodates power supply for
powered devices automatically.
7 Power up the Device
Check the device thoroughly before powering up the device.
7.1 Check the Device
Before applying power supply, perform the following:

The operating power supply should accord with rated input standard

The power cord and grounding cable is correctly connected

All cable connections (RJ45 ports, SFP ports) are correct

If cabling outside, ensure the Ethernet port lightning arrester and AC power source
lightning arrester are connected
7.2 Power up the Device
Step 1: Turn on the power switch (Power ON/OFF) on the back panel to power up the
switch.
Step 2: After being powered on, the switch will be initialized automatically. Please ensure
that following will occur to the LEDs one by one:

All LEDs (Power, SYS, PoE/Status, Link/Act, SFP1, SFP2) will light up for
self-checking.

SYS LED is off.

All LEDs are off except the Power LED.

After restart, the Power LED lights up, SYS LED is blinking, corresponding Link/Act
LED or SFP1/SFP2 LED is on or blinking and corresponding PoE/Status LED lights
up.