IP-COM G3210P, Руководство пользователя

Страница: 43 / 138

38

Advanced Settings

LACP Aggregation
Based on IEEE 802.3ad, LACP (Link Aggregation Control Protocol) provides a method to
implement link aggregation dynamically. Whether ports in LACP group are aggregation
ports or not is determined by LLDPDU frame auto-negotiation. LACP is enabled on the
member ports in LACP mode.
Ports in an LACP aggregation group may stay either in a forwarding status or a blocked
status. Once LACP is shaped, ports will be in a forwarding status. If all ports in the
aggregation group are not aggregated, only the first port will be in the forwarding status.
Ports in forwarding status can send/receive both service packets and LACP frames; ports
in blocked status can only send/receive LACP frames.
2.1 Link Aggregation
Click Port Management > Link Aggregation to enter page below:
Generally, there are four widely used aggregation algorithms. By default, the aggregation
algorithm of the switch is Source & Destination MAC.
Parameters on the page are described below:
Algorithm Meaning
Source MAC
Indicate member ports in a link aggregation group to share traffic load
according to source MAC addresses.
Dest MAC
Indicate member ports in a link aggregation group to share traffic load
according to destination MAC addresses.