IP-COM G3210P, Руководство пользователя

Страница: 12 / 138


Installation
7
7
1 Installation Considerations
To avoid any equipment damage or bodily injury caused by improper use, read the
following safety recommendations before installing the switch. Note that the
recommendations do not cover every possible hazardous condition.

Safety Caution

Do wear anti-static wrist straps and disable the power supply of this device while
installing this device

Use the included power cord for power supply

Ensure operating power supply accords with rated input standard

Ensure ventilation holes of the switch are in good condition

Do not open or remove the housing of the switch

Do disconnect power supply while cleaning the switch and do not use any liquid to
clean the switch

It's suggested to ground the switch to avoid strong inductive lightning. Keep the
switch away from power lines, electric lights, strong power grids, or anywhere the
power grid with strong current is reachable, all for better performance.
Note:
There is an IP-COM seal on one of the screws. You should keep the seal unbroken before
the technical staff maintains your switch. You should not open the housing of the device
unless you get the local reseller’s permission, or you have the technical capabilities and
are responsible for the results that occur because of unpermitted operation.

Site Requirements
1. Temperature & Humidity
Environment Temperature Humidity
Operating -10ºC ~ 45ºC 10% ~ 90%RH (non-condensing)
Storage -40
℃
~ 70
℃
5%~90% RH (non-condensing)
2. Cleanliness Requirements
In case that static electricity affects this device
’s normal operation, please observe the
following guidelines:

Keep indoor environments clean and dust the switch regularly

Keep the switch well-grounded for electrostatic transferring