IP-COM G3210P, Руководство пользователя

Страница: 28 / 138


Advanced Settings
23
Firmware Version Display the switch
’s software version and release date.
Hardware
Version
Display the switch
’s hardware version.
MAC Address Display the switch
’s physical address.
Management
VLAN
Management 802.1Q VLAN ID of the switch (default: 1).
If you want to change the management VLAN, click VLAN
Management > VLAN Configuration to create a management
VLAN first. At this time, if you want to access the switch you need to
reconnect to a certain port in the new management VLAN. (Note:
only when this port
’s PVID is the same with its management VLAN
can you have an access for the Internet).
Tip:
Only in 802.1Q VLAN mode, can this parameter be configurable.
System Name
By default, the system name is G3210P_EN. It is suggested to
configure a designated name for the switch so that you can locate it
quickly when you manage it in your network.
DHCP
Enable/Disable the DHCP server on the switch.
Enable: In this status, the switch will obtain an (management) IP
address, subnet mask and gateway automatically and you can view
the IP from DHCP clients list and use it to log in to the switch via
Http or Telnet.
Disable: In this status, you need to configure the switch
’s IP
address, subnet mask, and gateway manually.
IP Address
You can view and modify the switch
’s IP address here when the
DHCP server is disabled. The default value is 192.168.0.1.
This IP address is also the management IP address of the switch.
You can use it to log in to the switch via Http or Telnet.
Subnet Mask
You can view and modify the switch
’s subnet mask here when the
DHCP server is disabled. The default value is 255.255.255.0.
Gateway
You can view and mod
ify the switch’s default gateway here when
the DHCP server is disabled.