IP-COM G3210P Скачать руководство пользователя страница 51

Страница: 51 / 138



Advanced Settings

Hybrid

If the VID value of the packet

belongs to Tagged VLAN, the

packet will be forwarded with Tag; If

the VID value of the packet belongs

to Untagged VLAN, the packet will

be forwarded after removing its

VLAN tag.



802.1Q VLAN configuration

This section includes the following four parts: VLAN Mode Toggle, 802.1Q VLAN, Trunk

Port and Hybrid Port.

VLAN Mode Toggle

: Used for toggling 802.1Q VLAN and Port VLAN.

802.1Q VLAN

: Used for configuring and displaying 802.1Q VLAN.

Trunk Port

: Used for configuring Trunk ports.

Hybrid Port

: Used for configuring Hybrid ports.

1.1 VLAN Mode Toggle

Click

VLAN Management > VLAN Configuration > VLAN Mode Toggle

to enter page

below to set VLAN mode to 802.1Q VLAN.

Note:



Once VLAN mode is toggled from 802.1Q VLAN to Port VLAN, all configurations,

including MAC filter, static MAC address and port isolation, related to 802.1Q VLAN

will be cleared.



If you want to enable Port VLAN, please ensure voice VLAN is disabled.

1.2 802.1Q VLAN

Click

VLAN Management > VLAN Configuration > 802.1Q VLAN

to enter page below to

create 802.1Q VLAN.

Содержание G3210P











































































































































Результаты поиска

Содержание G3210P

Отзывы:

IP-COM G3210P, Руководство пользователя, Страница: 51 / 138

Результаты поиска

Содержание G3210P

Отзывы: