IP-COM G3210P, Руководство пользователя, Страница: 7 / 138


Product Overview
2
Package Contents
Open the package and verify the following items:

Switch (1)

Power Cord (1)

L-shaped Bracket (2)

Screw (6)

Footpad (4)

Install Guide (1)
If any item is missing or damaged, contact the place of purchase immediately.
Physical Appearance
1 Front Panel
The following parts are located on the front panel shown as below.

Reset Button
With the switch powered on, pressing the Reset button for at least 5 seconds and then
releasing it, restores the switch to factory default settings. The switch will reboot
automatically after reset and this process takes about 45 seconds.
While rebooting, the following will occur: All LEDs light up

SYS LED is off

All LEDs are
off except the Power LED

SYS is on and blinking.

LEDs
The following table describes the LED designations
：
LED Status Description
Power
Solid Proper connection to power supply
Off
Improper connection to power supply or malfunction
occurs.
SYS
Blinking The system is functioning properly.
Solid The system is functioning improperly.
Off The system is still rebooting.