TDX WHEELCHAIRS
40
Part No. 1114809
FIGURE 7 - INSTALLING ADJUSTABLE ANGLE FLIP-UP FOOTPLATE
HINGE
Footplate
Hinge
Footrest Support
Spacer
Locknut
Mounting Screw
Washers
INSTALLING/ADJUSTING ADJUSTABLE ANGLE FLIP-UP
FOOTPLATES
INSTALLING ADJUSTABLE ANGLE FLIP-UP FOOTPLATES (FIGURE 8)
1. Slide the half clamp over the footplate hinge.
2. Loosely tighten the two (2) flat screws that secure the footplate to the half clamp.
3. Adjust the footplates to the necessary angle and depth for the user. Refer to AD-
JUSTING ADJUSTABLE FLIP-UP FOOTPLATES in this section of the manual.
ADJUSTABLE ANGLE FLIP-UP FOOTPLATE DEPTH ADJUSTMENT
(FIGURE 8)
1. Remove the two (2) flat screws, washers and locknuts that secure articulating
footplate to the half clamp.
NOTE: Observe the angle of the articulating footplate for reinstallation.
2. Move articulating footplate to one (1) of four (4) mounting positions.
NOTE: If desired depth is still not obtained, rotate the half clamp on the footplate hinge 180
o
.
3. Retighten the two (2) flat screws, washers and locknuts.
NOTE: The settings for positioning the articulating footplates on the half-clamps may vary for
each footplate.
4. Refer to ADJUSTABLE ANGLE FLIP-UP FOOTPLATE ANGLE ADJUSTMENT or
ADJUSTABLE ANGLE FLIP-UP FOOTPLATE PERPENDICULAR AND/OR INVER-
SION/EVERSION ADJUSTMENT
in this section of the manual.
SECTION 4
FRONT RIGGINGS
FRONT
RIGGINGS
All manuals and user guides at all-guides.com
