Part No. 1114809
43
TDX WHEELCHAIRS
REMOVING
1. Push the legrest release handle toward the inside of the wheelchair (facing the front
of the wheelchair) and swing the legrest to the outside of the wheelchair.
2. Lift up on the legrest and remove from the wheelchair.
3. Repeat STEPS 1- 2
for opposite side of wheelchair.
Hinge Pins
Legrest
Calfpad
Legrest Release Handle
Bolt/Nut
Hinge Plates
FIGURE 12 - INSTALLING/REMOVING ELEVATING LEGRESTS
RAISING/LOWERING ELEVATING LEGRESTS AND/OR
ADJUSTING CALFPADS (FIGURE 13)
WARNING
Minimum ground clearance for footrest is 3-inches - otherwise personal
injury and damage may result.
RAISING/LOWERING ELEVATING LEGRESTS
1. Perform one (1) of the follow-
ing:
RAISING - Pull back on the
release lever until the leg is
at the desired height.
LOWERING - Support leg with
one (1) hand and push
release lever downward
with other hand.
ADJUSTING CALFPADS
1. Turn the calfpad towards the
outside of the wheelchair.
2. Slide the calfpad up or down
until the desired position is
obtained.
3. Turn the calfpad towards the
inside of the wheelchair.
Legrest to Normal Position
FIGURE 13 - RAISING/LOWERING
ELEVATING LEGRESTS AND/OR
ADJUSTING CALFPADS
Secure
Calfpad
Adjust
Calfpad
SECTION 4
FRONT RIGGINGS
FRONT
RIGGINGS
All manuals and user guides at all-guides.com
