background image

SPECIFICATIONS- STORM TDX5

SPECIFICATIONS FOR STORM TDX 5

Seat Width Range:

ADULT

JUNIOR

(Fixed Width) (Adjustable Width)

Adjustable Seat Back Angle (ASBA)

16 to 24-inches

12 to 15-inches

Seat Depth Range:

16 to 22-inches

12 to 16-inches

(in 1-inch increments)

Back Height Range:

12 to 24-inches

Back Angle Range:

80

o

 to 100

in 5

increments

Seat-to-Floor (approximate)

Standard:

17-inches @ 5°

Medium:

19-inches @ 5°

Tall:

21-inches @ 5°

Overall Width of Base:

25-inches (w/o joystick)

Overall Height

ASBA Frame: 0° Seat Angle, 16-inch High Back

Standard:

33-1/4-inches

Medium:

35-1/4-inches

Tall:

37-1/4-inches

Overall Length:

35-1/4-inches w/o front rigging

42.9-inches w/center mount

front rigging, 0

o

 Seat Angle

Weight
True Track HD Motor Package

W/O GP24 Batteries:

208 lbs.

With two (2) GP24 Batteries:

310 lbs.

Drive Axle:

Non-Adjustable

Drive Wheels/Tires:

(Foam Filled or Pneumatic)

Standard:

14 x 3-inches

PHYSICAL DIMENSIONS

Casters w/Precision Sealed Bearings

Semi-Pneumatic (4 Casters)

Standard:

6 x 2-inches

SPECIFICATIONS

NOTE: All dimensions are ± 1/2-inch.

Part No. 1114809

7

TDX WHEELCHAIRS

All manuals and user guides at all-guides.com

Содержание TDX 3









































































Отзывы: