TDX WHEELCHAIRS
48
Part No. 1114809
ADJUSTING FLIP BACK ARMRESTS (FIGURE 2)
WARNING
Make sure the flip back armrest release and height adjustment levers are
in the locked position before using the wheelchair.
POSITIONING FLIP BACK ARMRESTS FOR USER TRANSFER
1. Unlock the flip back armrest by pulling
the armrest release lever into the
HORIZONTAL position.
WARNING
Armrest release lever must remain
in the horizontal position during
transfer, otherwise injury may
result.
2. Pull up on the flip back armrest and
remove the armrest from the front
arm socket.
3. Continue to pull up on the flip back
armrest until the armrest is out of the
way.
4. Repeat STEPS 1-3
for opposite flip
back armrest, if necessary.
POSITIONING FLIP BACK
ARMRESTS FOR USE
1. Make sure the flip back armrest
release lever is in the HORIZONTAL
position.
2. Install the flip back armrest into the
front arm socket.
3. Lock flip back armrest by pressing flip
back armrest release lever into the
VERTICAL position.
4. Lift up on flip back armrest to make sure the armrest is locked in place.
5. Repeat STEPS 1-4
for opposite flip back armrest, if necessary.
ADJUSTING
1. Unlock top of flip back armrest by pulling height adjustment lever into the HORI-
ZONTAL position.
2. Adjust top of the flip back armrest to the desired height.
3. Lock top of flip back armrest by pushing height adjustment lever into the VERTICAL position.
SECTION 5
ARMS
FIGURE 2 - ADJUSTING FLIP BACK
ARMRESTS
LOCKED
(VERTICAL)
Height
Adjustment
Lever
Flip Back
Armrest
UNLOCKED
(HORIZONTAL)
Front Arm
Socket
LOCKED
(VERTICAL)
UNLOCKED
(HORIZONTAL)
Armrest Release Lever
ARMS
All manuals and user guides at all-guides.com
