SECTION 6: PREVENTATIVE MAINTENANCE
Part No. 715-0080, Rev. B
- 60 -
MONTHLY MAINTENANCE
The following procedures should be performed monthly by a biomedical maintenance person. These
checks should be in addition to the daily maintenance checks.
OPERATIONAL CHECK
1.
Connect the incubator to an AC power source and turn the incubator power button on.
2.
Adjust the setpoint to 38.9
C and observe the incubator as the temperature rises to
perform the following checks.
3.
As the temperature reaches 38.5
0.1
C, the
HIGH TEMP
indicator should illuminate.
4.
Adjust the setpoint to 37
C and allow the temperature to stabilize at that setting.
KEYBOARD / LED CHECK (OPTIONAL FEATURE)
1.
Turn the incubator on, press the PulseOx SET button.
2.
Press the Up Arrow button and see the display in the Pulse and %SpO
2
change from
“OFF” to “On”.
3.
Press the Down Arrow button and see the display in the Pulse and %SpO
2
change from
“On” to “OFF”.
4.
Check that the %SpO
2
and Pulse HI and LO LEDs are on. Continue to press the SET
button and check that the LEDs correspond to the marked display.
ALARM MUTE CHECK (OPTIONAL FEATURE)
1.
Turn on the Oxygen Monitor and unplug the oxygen sensor.
2.
Listen for the alarm. After hearing the alarm, press the
MUTE
button.
3.
Verify the mute on LED lights up and the alarm silences.
4. Wait
approximately
1 minute and verify the alarm sounds again.
5.
Turn off the Oxygen Monitor and plug the sensor back in.
TANK INSPECTION
1.
Inspect the air and oxygen tanks for the date of the last hydrostatic test. Each tank must
be hydrostatically tested periodically according to the manufacturer’s recommendation.
The date of the last test is stamped on the top of the tank in month and year (mmyy).
2.
Inspect the recharge record of each tank and, if the record indicates there have been a
maximum number of pressure cycles as per DOT (Department of Transportation)
specifications, the tank should be destroyed and another tank used.
Содержание AirBORNE A750i
