Intermec Trakker Antares 2475, Руководство пользователя

Страница: 67 / 104

Chapter 3— Operating the Terminal in a Network
Trakker Antares 2475 Vehicle-Mount Terminal User’s Manual 53
3 On your Trakker Antares terminal, set the User Name and Password
parameters.
a
Scan this bar code to access the TRAKKER Antares 2400 Menu
System:
TRAKKER Antares 2400 Menu System
*..-.*
*..-.*
The Main Menu appears.
b
Choose Configuration Menu > Communications Menu > Radio .
c
Use the arrow keys to scroll to the LEAP screen and set the User
Name and Password parameters.
If you just want to make sure that your terminal can be authenticated,
you can use the default values of “anonymous” and “anonymous.”
However, Intermec recommends that you set your permanent user
name and password to unique values. For help, see Chapter 6,
“Configuration Command Reference,” in the 2400 Family system
manual.
4 Exit the menu system and save all changes.
5 When the terminal is authenticated, it emits a low beep and then a high
beep. The application that was running on the terminal, if any, resumes.
If authentication fails, the terminal emits a high beep and then a low
beep. The terminal will wait 60 seconds and restart the authentication
process. For help, see “Problems While Configuring 802.1x Security”
on page 61.
Monitoring Network Communications
After you configure the 2475 in the RF network, you can use the
application on the 2475 to collect and transmit data through network
communications. If the 2475 is communicating with your host computer,
it will connect to your host computer and begin running the application
that shipped on the terminal.
As you use the 2475 to collect data, the Network Connect status light
helps you monitor network communications between the 2475 and other
devices in the RF network. To learn how to use the Network Connect
icon, see “Learning About the Status Lights” on page 18.