Intermec Trakker Antares 2475, Руководство пользователя

Страница: 62 / 104

Chapter 3— Operating the Terminal in a Network
48 Trakker Antares 2475 Vehicle-Mount Terminal User’s Manual
To communicate through the network, all RF terminals must contain an
IEEE 802.11b radio. You must set certain radio parameters to the same
configuration on both the terminal and the access points.
802.11b Radio
To use 802.11b radios in your network, you need to configure
• Network Name. On the access points, the Network Name parameter is
called the SSID (Network Name) parameter. This parameter is case-
sensitive.
On the terminal, you can also set the Network Name parameter to
“ANY” or leave the field blank, allowing the terminal to communicate
with any access point that has the same radio and is within range.
However, Intermec recommends that you define a unique network
name.
• WEP Encryption. If you are using 802.1x security, you do not
configure WEP Encryption.
• (802.1x security) User Name and Password. For more information
about configuring the terminal for 802.1x security, see “Configuring the
802.1x Security Parameters” on page 49.
The Network Name and WEP Encryption parameters must be set to the
same value on the terminals and the access points.
Configuring the 2475 Network Parameters
When you install the 2475 in a network, you must configure the network
parameters that control how the terminal communicates in the network.
The set of network parameters you must configure depends on whether
you install the terminal on the same subnetwork as the Intermec Gateway,
DCS 30X, or host (TCP/IP) or on a different subnetwork.
You need to configure
• Network Activate.
If you are operating the 2475 in a WTP network, you only need to
configure the Network Activate parameter.
If you are operating the 2415 in a TCP/IP or UDP Plus network, make
sure that 2.4 GHz RF (OpenAir radio) or 802.11 DS (802.11b radio)
appears in the Activate field.
• (UDP Plus) Controller IP Address.
• (TCP/IP) Host IP Address.
• Terminal IP Address (Non-DHCP environment only).
• Network Port.