Intermec Trakker Antares 2475, Руководство пользователя

Страница: 80 / 104

Chapter 4— Troubleshooting and Maintaining the Terminal
66 Trakker Antares 2475 Vehicle-Mount Terminal User’s Manual
Problems While Running Applications
If you are running applications on the terminal and have trouble, check
these possible problems and solutions.
Problems While Running Applications
Problem Possible Solution
There is not enough memory to load a
program. You need to free conventional memory.
The terminal does not boot after you
modified the CONFIG.SYS file to configure
a ROM-DOS RAM drive. Correct the error in CONFIG.SYS and use the DOS software tools
to recreate drive A with the corrected CONFIG.SYS file.
You try to run a DOS application in the
TRAKKER Antares 2400 Menu System and
see this message:
Not a valid application.
You tried to run a DOS .EXE application from the TRAKKER
Antares 2400 Menu System. You can only run .BIN applications in
the menu system. To run a DOS .EXE application, enter the
filename at the DOS prompt. For help, see “Running DOS
Applications and Using ROM-DOS Commands” in Appendix D of
the 2400 Family system manual.
You see one of these error messages while
running a PSK or EZBuilder application:
SCREEN ERROR: 30
Code: 9
Hit any key To exit!
SCREEN ERROR: 31
Code: 3
Hit any key To exit!
You must set the RAM Drive Size configuration command. For help,
see “RAM Drive Size” in Chapter 6 of the 2400 Family system
manual.
Problems Scanning Bar Code Labels
If you cannot scan bar code labels or you are having problems with the
scanner, check these possible problems.
Problems Scanning Bar Code Labels
Problem Possible Solution
You cannot see a red beam of light from the
laser scanner. You may be too far away from the bar code label. Try moving closer
to the bar code label and scan it again.
You may be scanning the bar code label “straight on.” Try changing
the scanning angle until the laser beam is the brightest. This is the
best scanning angle.
Do not look directly into the window area or at a reflection of
the laser beam while the laser is scanning. Long-term exposure to
the laser beam can damage your vision.
Attention: Danger: Ne regardez pas directement la réflexion d’un
rayon laser ou dans la fenêtre du laser lorsque celui-ci est en
opération. Si vous regardez trop longtemps un rayon laser, cela
peut endommager votre vue.