Intermec Trakker Antares 2475, Руководство пользователя

Страница: 66 / 104

Chapter 3— Operating the Terminal in a Network
52 Trakker Antares 2475 Vehicle-Mount Terminal User’s Manual
To enable 802.1x LEAP security on the terminal
1
Make sure that:
• your authentication server is properly configured. For help, see the
documentation for your authentication server.
• your Cisco access point is properly configured for LEAP security. For
help, see the documentation for your Cisco access point.
• your terminal is configured with the primary network, advanced
network, and radio parameters.
2
Configure your Cisco access point to communicate with your Trakker
Antares terminal using LEAP security.
a
Access the AP Radio Data Encryption screen. For help, see the
documentation for your Cisco access point.
Note: The AP Radio Data Encryption screen for your Cisco access
point may look different than the one shown here.
b
Check the Open check box for both Accept Authentication Type
and Require EAP .
c
Click OK .