manualshive.com logo in svg

Intermec DCS 300, Руководство пользователя, Страница: 397 / 452

Поделиться
Скачать
Intermec DCS 300 Скачать руководство пользователя страница 397

Upgrading the DCS 300 and Devices

B-7

B

In the Scheduled Firmware Upgrades box, you can view the state of all the scheduled
upgrade events.

Column

Description

Example

1

The date on which the upgrade event is scheduled to
occur.

2000/09/13

2

The time at which the upgrade event is scheduled to
occur. Time is in 24-hour format.

13:30

3

The state of the scheduled upgrade event:

Pending

    The utility is waiting until the scheduled date

and time before starting the upgrade.

Upgrading

    The utility is currently upgrading the

devices.

Missed

    The utility was unable to perform the upgrade.

The event may have been scheduled in the past or data
collection was not started on the DCS 300 at the
scheduled time of the upgrade event.

Complete

    The utility successfully performed the

upgrade.

Errors

    The utility was unable to upgrade all the devices

because one or more of the devices may have been
unavailable at the scheduled time. The utility may have
timed out or you may have stopped the upgrade on one of
the devices.

Pending

4

The name of the upgrade event.

Upgrade Firmware
to v2.0

Now, you need to add, edit, or delete upgrade events. For help adding upgrade events,
see “Adding Upgrade Events” in the next section.

To exit the Firmware Upgrade Utility

1. From the Firmware Upgrade Utility window, choose Close. You return to the

System Maintenance dialog box.

2. Choose Close. You return to the main screen.

Содержание DCS 300





































































































































































































































































































































































































































































Отзывы:

Нет отзывов