manualshive.com logo in svg

Intermec DCS 300, Руководство пользователя, Страница: 387 / 452

Поделиться
Скачать
Intermec DCS 300 Скачать руководство пользователя страница 387

Specifications and Other Helpful Information

A-15

A

4. Enter the file name or data in the field in the Initialization Data box.

5. Choose Add. The file name or data appears in the Files and Data list box.

6. Repeat Steps 3 through 5 until you have entered all the files and data you want to

download for this terminal or group. Files and data are downloaded in the order
they appear in the Files and Data list box.

•

Choose Move Up or Move Down to change the order of the files and data.

•

Select a file name or data and choose Delete to delete a file name or data.

•

To start over, clear the entire Files and Data list box by choosing Clear.

7. Choose OK to save your changes and return to the Terminal Download

Configuration dialog box.

8. Choose Download. The files and data configured for the terminal or group are

downloaded to the terminal or group.

Using Download Server Commands to Transfer Files

This section explains some special commands that you can run on devices or use with
the Send Transaction feature on the DCS 300. Using these download server commands,
you can send files to devices or groups that are configured in the download server.

To send the commands from a device, you need to include these commands in an
application that runs on the device.

To send these commands using the Send Transaction feature, you need to enter the
commands as data. Then, open the Send Transactions dialog box and send the
download server command from the server to a device or a group, or emulate a request
by a device for a file.

To create the download server command

1. Configure the download server for the files and data that each device or group will

receive. For help, see “Using the Download Server to Transfer Files” in the
previous section. Do not choose the Download button.

2. Create your download server command.

Содержание DCS 300





































































































































































































































































































































































































































































Отзывы:

Нет отзывов