Intermec DCS 300 Скачать руководство пользователя страница 214 | Manualshive

Страница: 214 / 452

Intermec DCS 300 Скачать руководство пользователя страница 214

DCS 300 User’s Manual

8-6

Setting Up Peer-to-Peer Links

To run TCP/IP or APPC applications in your data collection network, you must identify
all the application names in the DCS 300. The DCS 300 puts these names in a peer-to-
peer destination list. Every time an application connects to the DCS 300, it informs the
DCS 300 of its name. The DCS 300 dynamically associates the application as one of
the destinations in its peer-to-peer destination list and forwards the appropriate
transactions to it. The DCS 300 routes transactions to applications or other peer-to-peer
destinations by one of two ways:

•

The DCS 300 recognizes the transaction ID and routes the transaction to all
destinations in the peer-to-peer destination list that are associated with this
transaction ID.

•

The application is the destination in the transaction header.

This section describes how to set up the peer-to-peer destination list for your host
applications and your devices.

Before you proceed, make sure you have already performed these tasks:

•

Installed the DCS 300.

•

Configured the network adapter cards.

•

Installed and configured the downline connection points and data collection
devices.

To set up a peer-to-peer destination list

1. From the main screen, choose Peer-to-Peer and then choose Host Connection. The

Peer-to-Peer Destination List dialog box appears.

2. Choose Add, Edit, or Delete destinations. If you choose Add, the Peer-to-Peer

Destination Parameters dialog box appears.

«
...
212
213
214
215
216
...
»

Содержание DCS 300





































































































































































































































































































































































































































































Отзывы:

Нет отзывов