manualshive.com logo in svg

Intermec DCS 300, Руководство пользователя, Страница: 221 / 452

Поделиться
Скачать
Intermec DCS 300 Скачать руководство пользователя страница 221

Running Peer-to-Peer Applications

8-13

8

The DCS 300 supports only requester (client) connections. The remote application
initiates both sockets.

For help, see the 

DCS 300 Technical Reference Manual

.

How the DCS 300 Communicates With Applications

To use the NetComms, you must first configure the DCS 300 for TCP/IP
communications. For help, see “Configuring the Ehternet Card for TCP/IP” in
Chapter 3.

Applications acknowledge the DCS 300 directly by placing data in an ACK transaction
and by using the Inter system transaction to control their interactivity with the
DCS 300.

•

The server send NetComm is responsible for creating the application IPC channel
and forwarding any data in that channel to the application.

•

The server receive NetComm is responsible for opening the Receive (input)
channels of the message handler and for sending data that is received from the
application through the network connection to the message handler.

When the DCS 300 is turned on, it detects when TCP/IP is being used and it starts the
appropriate NetComms.

If you use the wrong syntax or do not supply all the required startup arguments, an error
message appears in the error log.

The following figure shows the NetComms communicating directly with applications.
NetComms use IPC channels to exchange data with other server components and they
use sockets to exchange data with a TCP/IP application.

Содержание DCS 300





































































































































































































































































































































































































































































Отзывы:

Нет отзывов