Intermec DCS 300, Руководство пользователя, Страница: 126 / 452

DCS 300 User’s Manual
4-32
8. Choose OK. The WTP Devices dialog box appears. For help, see “Setting Up the
WTP Devices” later in this chapter.
9. Choose OK. The RF Hosts Created for WTP dialog box appears. For help, see
“About the RF Hosts Created for the WTP Network” later in this chapter.
10. Choose OK to close the RF Hosts Created for WTP dialog box and return to the
Connection Point List dialog box.
11. Choose Close to return to the main screen.
12. Enable all the WTP devices that you want to communicate with the DCS 300. For
help, see “Enabling the WTP Devices” later in this chapter.
Adding a WTP Network
You can define a default method for the WTP devices to get a host name when they are
communicating with different types of hosts. You can configure the WTP devices to
•
explicitly link with a specific host. Click the down arrow on the right side of the
field and choose a host that you have configured.
•
prompt the user to enter a host name. Click the down arrow on the right side of the
field and choose <Prompt>.
•
not communicate with a host. Click the down arrow on the right side of the field
and choose <none>.
To configure a specific device to communicate in a different way to a host, see
“Configuring TE Links” in Chapter 7.
After you finish adding the WTP network and you choose OK, the WTP Devices dialog
box appears. For help, see “Setting Up the WTP Devices” in the next section.
To add a WTP network
1. From the main menu, choose the type of communications you are using to connect
the server to the host.
2. Choose Downline Network. Two buttons, Connection Points and Downline
Devices, appear.
3. Choose Connection Points. The Connection Point List dialog box appears.
4. Choose Add. The Add a Downline Connection Point dialog box appears.
5. Choose WTP and then choose Add. The WTP Parameters dialog box appears.