Intermec DCS 300, Руководство пользователя, Страница: 352 / 452

DCS 300 User’s Manual
11-20
Configuring the NetOp Guest (Remote PC)
For help installing the NetOp guest software, see the NetOp user’s guide that shipped
with your guest software.
Note: The guest communication settings must match the host communication settings;
that is, they must match the communication settings on the DCS 300.
Using NetOp Guest for Windows
After you install the NetOp guest software on your remote PC, follow these tips to
ensure that a connection is made.
Tips for using TCP/IP
1. Choose the Call a Host PC toolbar button. The Call Host dialog box appears.
2. In the Name field, enter the IP address of the DCS 300.
3. Choose Call.
Tips for using dial-up SLIP in Windows 95/98/ME
1. In the Control Panel, use the Add/Remove program to install Dial-up Networking,
if it is not already installed.
2. Select the Windows Setup tab to install SLIP support. Click the Have Disk button.
The files are in the
ADMIN\APPTOOLS\DSCRIPT
directory on your Win95 CD.
3. Create a phonebook entry.
a. In My Computer folder, double-click the Dial-Up Networking icon.
b. In the Dial-up Networking folder, double-click the Make a New Connection
icon to create a new Dial-up Networking connection.
c. Enter a name for the connection and click Next.
d. Enter the phone number you want to dial and click Next.
e. Click Finish to create the connection. An icon with the name of the new
connection will be created in the Dial-up Networking folder.
f. Right click on the connection icon just created and select Properties.
g. In the General tab, press the Server Type button.
h. Select SLIP as the Type of Dial-up Server and uncheck the Log on to network
check box.
4. In the TCP/IP Settings dialog box, type 222.222.222.20 as the IP address. Make
sure the Use IP header compression check box is unchecked.