manualshive.com logo in svg

Intermec DCS 300, Руководство пользователя, Страница: 195 / 452

Поделиться
Скачать
Intermec DCS 300 Скачать руководство пользователя страница 195

Running Terminal Emulation

7-25

7

To configure an IP host

1. From the main screen, choose Terminal Emulation.

2. Choose IP Host. The IP Terminal Emulation Configuration dialog box appears.

The list box contains the host names that you have configured. Hosts that have
ports are prefixed by a + (plus) sign or a - (minus) sign. Double-click on a host
name with a + sign and the ports that have been configured for that host appear
underneath it. Double-click on a host name with a - sign and the ports for that host
disappear.

3. Choose Add Host, Add Port, Edit, or Delete.

Note: 

You cannot delete a host if it is linked to a device or a terminal session.

If you choose Add Host, the TCP/IP Host Connection dialog box appears. For help,
see “Adding a TCP/IP Host” later in this section.

If you choose Add Port, the Port Configuration dialog box appears. For help, see
“Adding an IP Port” later in this section.

Содержание DCS 300





































































































































































































































































































































































































































































Отзывы:

Нет отзывов