manualshive.com logo in svg

Intermec DCS 300, Руководство пользователя, Страница: 204 / 452

Поделиться
Скачать
Intermec DCS 300 Скачать руководство пользователя страница 204

DCS 300 User’s Manual

7-34

To remove the password from all the terminals at the same time, choose Remove
All. All the terminals are removed from the Secured Terminals list box and appear
in the Available Terminals list box.

4. Choose Close to close the dialog box and return to the System Maintenance dialog

box.

5. Choose Close to return to the main screen.

To verify that security is set

1. From the main screen sidebar buttons, choose System Reporting. The System

Reporting dialog box appears.

2. Choose View Runtime Configuration and then choose Start. The View Runtime

Configuration Options dialog box appears.

3. Make sure that the Intermec controllers/Devices check box is checked and choose

Run View. The Runtime Configuration dialog box appears.

4. Scroll through the file until you see a list of the devices that are enabled. If

Password Protected is Yes, then security is set.

5. Choose Close to close the Runtime Configuration dialog box and return to the View

Runtime Configuration Options dialog box.

6. Choose Cancel to return to the System Reporting dialog box.

7. Choose Close to return to the main screen.

Using the Auto Login Feature

This feature enables the device to automatically log into the subsequent TE session if it
loses a host connection. When a terminal session is started, the device screen displays
the host login prompt. If you are using the auto-login feature, then once you log into a
host, the device runs the auto-login script file and saves your login information in
memory.

If you use a hot key sequence to end the TE session or if you must reboot the device,
you must log in again.

JANUS Devices

For help creating the auto-login script file, see your JANUS Terminal Emulation Quick
Reference Guide. After you create your auto-login script file (

AUTOLOG.SCR

), you

must download it to the same directory as the TE application on your JANUS device.

On the DCS 300, a sample 

AUTOLOG.SCR

 is in the 

\USERDATA\TERMAPPS\TE\

ADD_FILE

 directory.

Содержание DCS 300





































































































































































































































































































































































































































































Отзывы:

Нет отзывов