manualshive.com logo in svg

Intermec DCS 300, Руководство пользователя, Страница: 359 / 452

Поделиться
Скачать
Intermec DCS 300 Скачать руководство пользователя страница 359

Troubleshooting

11-27

11

Running System Traces

Use these procedures to start and stop the system traces. For help running the TTM
utility, see the online help.

On the DCS 300, the transaction trace file is named 

TRXTRACE.TXT

 and it contains up

to 10,000 transactions in the order that the DCS 300 received the transactions. The
SNA trace file is called 

SNATRACE.TXT

.

When you start a system trace, the Monitor Message Handler Transactions dialog box
appears. As you send transactions from your devices to the hosts, you can view the
traces.

MH_IN box

    This box records the information that enters the message handler Receive

(input) channel. Choose Clear to clear the information in the box.

MH_ACK box

    This box records the information that enters the message handler ACK

channel. Choose Clear to clear the information in the box.

Output (applications) box

    This box records the information that the message handler

sends to the applications and devices. Choose Clear to clear the information in the box.

To start the DCS 300 trace utility

1. Make sure that you have saved and activated your runtime configuration.

2. Make sure that you have started data collection.

3. Make sure that you added a transaction trace or an SNA trace to the Trace

Configuration dialog box.

4. In the Trace Control box, choose Start. A message box appears confirming that you

want to start all the traces.

5. Choose Start. The Elapsed Time clock starts and the Monitor Message Handler

Transactions dialog box appears.

Содержание DCS 300





































































































































































































































































































































































































































































Отзывы:

Нет отзывов