manualshive.com logo in svg

Intermec DCS 300, Руководство пользователя, Страница: 177 / 452

Поделиться
Скачать
Intermec DCS 300 Скачать руководство пользователя страница 177

Running Terminal Emulation

7-7

7

Configuring Telnet TE (VT/ANSI, TN5250, and TN3270)

When you set up your data collection network to run Telnet TE, you need to configure
the DCS 300 and the devices. You can configure the DCS 300 to communicate with
VT100, VT220, VT320, ANSI, TN5250, and TN3270 hosts.

Configuring the DCS 300

Before you can run TE, you must identify all the IP hosts and their ports. For each host,
you must also use DNS or manually enter their IP addresses. Before you proceed, make
sure you have performed these tasks:

•

Installed the DCS 300.

•

Configured the network adapter cards.

•

Installed and configured the downline connection points and data collection
devices.

To configure an IP host

1. From the main screen, choose Terminal Emulation.

2. Choose IP Host. The IP Terminal Emulation Configuration dialog box appears.

The list box contains the host names that you have configured. Hosts that have
ports are prefixed by a + (plus) sign or a - (minus) sign. Double-click on a host
name with a + sign and the ports that have been configured for that host appear
underneath it. Double-click on a host name with a - sign and the ports for that host
disappear.

Содержание DCS 300





































































































































































































































































































































































































































































Отзывы:

Нет отзывов