Intermec 502O, Руководство пользователя

Страница: 57 / 402

dfda dfda
Learning How to Use the 5020
2-19
2
•
If you have been using the 5020 in a cold temperature environment and need to
replace or charge the main battery pack, let the main battery pack warm up for a
half hour before you charge it.
•
Store the battery chargers and spare main battery packs in a warm (office)
environment to ensure the most efficient operation.
Replace the main battery pack with Intermec Part No. 068537 only. The use of any
other battery pack may present a risk of fire or explosion. Contact your local Intermec
sales representative for replacement battery packs. DISPOSE OF USED BATTERY
PACKS PROMPTLY. KEEP AWAY FROM CHILDREN.
Warning
The lithium-ion battery pack used in this device may present a fire or chemical burn
hazard if mistreated. Do not disassemble, heat above 100
°°
C (212
°°
F) or incinerate.
Avertissement
Le bloc-batterie au lithium utilisé dans cet appareil peut présenter un risque
d’incendie ou de brûlure chimique en cas de mauvais traitement. Ne désassemblez
pas, ne chauffez pas à une température supérieure à 100°C (212°F) et n’incinérez
pas ce bloc-batterie.
Removing and Installing the Main Battery Pack
The main battery pack is the main power source for the 5020 and it charges the bridge
battery when required. If the main battery pack charge goes low, you need to replace it
or charge the main battery pack as soon as possible.
There are two ways to find out if the main battery pack is low:
•
Check the battery state icon.
•
Check power levels using the Power applet. Press
$ % to put focus on the
Notification Tray and press
3 or 9 to the battery icon and press &. This launches
the Power applet and displays the current battery status.
Caution
Removing the battery pack while the 5020 is on may cause loss of data.
Conseil
Ne détachez pas le jeu de piles pendant que le lecteur est actif car cela pourrait
entraîner la perte de données.