Intermec 502O, Руководство пользователя

Страница: 272 / 402

5020 Data Collection PC User’s Manual Nugg
Co d e 39
8-70
Scanner Timeout
Purpose: Defines the maximum length of time the scanner stays after you press the Scan button
or activate a tethered laser scanner.
Configuration: Use one of these methods:
Configuration
Applications
SNMP Bar Codes
Yes Yes Yes
In the Configuration or Unit Management application, choose Configure and then Data
Collection. Next, choose Scanner and then choose Timeout. For help, see Chapter 3,
“Configuring the 5020.”
On Cold Boot: Not saved
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.3.1.1.5.1.1
Syntax: SAdata
You only use the two-character command SA for bar code configuration labels.
Acceptable values for data are:
0 Disabled
1-60 Shutoff time in seconds
Default: Disabled (no timeout)
Scan: 1. Scan this bar code:
Enter Accumulate Mode / Set Scanner Timeout
*+/$+SA*
*+/$+SA*
2. Scan a numeric value for data from these bar codes:
*0* *1*
*0* *1*
*2* *3*
*2* *3*
*4* *5*
*4* *5*