Intermec 502O, Руководство пользователя

Страница: 256 / 402

5020 Data Collection PC User’s Manual Nugg
Co d e 39
8-54
Plessey
Purpose: Enables or disables decoding of Plessey symbology. Plessey code is pulse-width
modulated like most other bar codes. It includes a start character, data characters, an
eight-bit cyclic check digit, and a termination bar. The code is continuous and not
self-checking. You need to configure two parameters for Plessey code: Start Code and
Check Digit.
Configuration: Use one of these methods:
Configuration
Applications
SNMP Bar Codes
Yes Yes Yes
In the Configuration or Unit Management application, choose Configure and then Data
Collection. Next, choose Symbologies and then choose Plessey. For help, see
Chapter 3, “Configuring the 5020.”
On Cold Boot: Not saved
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.1.1.10.1
Syntax: CIdata
You only use the two-character command CI for bar code configuration labels.
Acceptable values for data are:
00 Disabled
30 Transmit check digit
31 Discard check digit
Default: Disabled
Scan: To disable Plessey:
Disable Plessey
*$+CI00*
*$+CI00*
Or: To set Plessey, scan one of these bar codes to transmit or discard the check digit:
Transmit Check Digit Discard Check Digit
*$+CI30* *$+CI31*
*$+CI30* *$+CI31*