manualshive.com logo in svg

Intermec 502O, Руководство пользователя

Поделиться
Скачать
Intermec 502O Скачать руководство пользователя страница 285

Nugg

 

Co d e 39

 Configuration Command Reference

8-83

8

SNMP Security Write Encryption

Purpose:

Sets the packet-level mode of security for SNMP read/write requests. If you enable
write encryption, all SNMP packets that are received with the read/write community
string have to be encrypted or the packet will not be authorized. You need to use
Intermec-provided software that supports encryption.

To enable security encryption, you also need to set the encryption key. For help, see
“SNMP Security Encryption Key” earlier in this chapter.

Configuration:

Use one of these methods:

Configuration
Applications

SNMP

Bar Codes

Yes

Yes

No

In the Configuration or Unit Management application, choose Configure and then
SNMP. Next, choose Security and then choose Write Encryption. For help, see
Chapter 3, “Configuring the 5020.”

On Cold Boot:

Not saved

SNMP OID:

1.3.6.1.4.1.1963.10.5.1.5.0

Options:

Acceptable values for the write encryption are:

1

On - SNMP packets must be encrypted.

2

Off - SNMP packets do not have to be encrypted.

Default:

Off

Содержание 502O



















































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды