Intermec 502O, Руководство пользователя

Страница: 265 / 402

Nugg
Co d e 39
Configuration Command Reference
8-63
8
RF Roaming Allowed
Purpose: Determines whether or not the OpenAir radio can roam between access points. All
access points are master stations and each master has a unique channel. If you have five
access points in one domain, the 5020 will connect to one access point when you turn it
on. This access point becomes the master station for the 5020.
When you set the RF roaming flag to “Not Allowed,” the 5020 will only communicate
with the master station (access point) to which it first connects. If you allow roaming,
the 5020 can communicate with any access point in the same domain. After you change
this parameter, suspend and resume the 5020 to make the change effective.
Configuration: Use one of these methods:
Configuration
Applications
SNMP Bar Codes
Yes Yes No
In the Configuration or Unit Management application, choose Configure and then
Network. Next, choose Radio, then Radio, and finally choose Roaming Allowed. For
help, see Chapter 3, “Configuring the 5020.”
On Cold Boot: Saved
SNMP OID: 1.3.6.1.4.1.1963.5.5.2.5.1.1.5.index
where index is the radio adapter card number.
Options: Acceptable values for the roaming flag are:
0 Not allowed
1 Allowed
Default: Allowed