Intermec 502O, Руководство пользователя

Страница: 291 / 402

Nugg
Co d e 39
Configuration Command Reference
8-89
8
TCP/IP Extensions Initial Roundtrip Time
Purpose: The initial roundtrip time is an average measurement of the delay between two hosts. In
general, this value is greater for wireless networks than for wired networks. You can
use the TCP/IP extensions commands to fine tune the network performance in a
wireless networking environment. After you change this parameter, suspend and resume
the 5020 to make the change effective.
Configuration: Use one of these methods:
Configuration
Applications
SNMP Bar Codes
Yes Yes No
In the Configuration or Unit Management application, choose Configure and then
Network. Next, choose Radio, then TCP/IP Extensions, and finally choose Initial
Round Trip Time. For help, see Chapter 3, “Configuring the 5020.”
On Cold Boot: Not saved
SNMP OID: 1.3.6.1.4.1.1963.5.15.5.3.1.2.index
where index is the radio adapter card number.
Options: An acceptable value for the initial roundtrip time is any number from 0 to
2,147,483,647 ms.
Default: 3000 ms