Intermec 502O, Руководство пользователя, Страница: 243 / 402

Nugg
Co d e 39
Configuration Command Reference
8-41
8
In the Configuration or Unit Management application, choose Configure and then
Network. Next, choose Radio or Ethernet, then IP Address, and finally Obtain IP
Address Via DHCP. For help, see Chapter 3, “Configuring the 5020.”
On Cold Boot: Saved
SNMP OID: 1.3.6.1.4.1.1963.5.15.5.2.1.1.index
where index is the radio or I/O adapter card number.
Options: Acceptable values for DHCP are:
0 Disable DHCP
1 Enable DHCP
Default: Enabled
DHCP Status
Purpose: If DHCP is enabled, you can display the dynamically-assigned address parameters once
the 5020 has negotiated with the DHCP server. You can check the current information
for these parameters:
•
IP address
•
Subnet mask
•
Default router
•
DNS servers (primary and secondary)
•
WINS servers (primary and secondary)
Configuration: The DHCP Status parameters are read-only parameters that cannot be changed.
In the Configuration or Unit Management application, choose Configure and then
Network. Next, choose Radio or Ethernet, then choose DHCP Status and then choose a
parameter. Choose Refresh to view the current assignments. For help, see Chapter 3,
“Configuring the 5020.”
On Cold Boot: Not applicable (read-only)
SNMP OID: Not applicable (see each DHCP parameter)
Default: None