Intermec 502O, Руководство пользователя

Страница: 223 / 402

Nugg
Co d e 39
Configuration Command Reference
8-21
8
Code 2 of 5
Purpose: Enables or disables decoding of Code 2 of 5 symbology. Code 2 of 5 uses the bars to
encode information and the spaces to separate the individual bars. This code is discrete
and self-checking. You can only enable Code 2 of 5 if the Interleaved 2 of 5 (I 2 of 5)
code is disabled. If you enable I 2 of 5, Code 2 of 5 is automatically disabled.
Configuration: Use one of these methods:
Configuration
Applications
SNMP Bar Codes
Yes Yes Yes
In the Configuration or Unit Management application, choose Configure and then Data
Collection. Next, choose Symbologies and then choose Code 2 of 5. For help, see
Chapter 3, “Configuring the 5020.”
On Cold Boot: Not saved
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.1.1.4.1
Syntax: CCdata
where data consists of three digits as follows:
First digit: 0 Code 2 of 5, 3 Bar Start/Stop
1 Code 2 of 5, 2 Bar Start/Stop
Second and 00 Disable Code 2 of 5
third digits: 01-32 Label Length
You only use the two-character command CC for bar code configuration labels.
Default: Disabled
Scan: To disable Code 2 of 5, scan this bar code:
Disable Code 2 of 5
*$+CC000*
*$+CC000*