Intermec 502O, Руководство пользователя

Страница: 211 / 402

Nugg
Co d e 39
Configuration Command Reference
8-9
8
Acknowledgement Delay Lower Limit
Purpose: When the 5020 sends a message to the DCS 300, the 5020 waits to receive a response
acknowledging the message. If no response is received within the Acknowledgement
Delay Lower Limit time, the 5020 sends the message again at the time interval set for
the lower limit. The 5020 will continue to send the data at increasingly longer intervals
until it reaches the Acknowledgement Delay Upper Limit time. The 5020 continues
sending the message at the time interval set for the upper limit until a response is
received or a timeout error occurs.
You only use this command in a UDP Plus network.
Configuration: Use one of these methods:
Configuration
Applications
SNMP Bar Codes
Yes Yes No
In the Configuration or Unit Management application, choose Configure and then
Network. Next, choose Protocols, then UDP Plus, and finally choose Ack Delay Low
Limit. For help, see Chapter 3, “Configuring the 5020.”
On Cold Boot: Not saved
SNMP OID: 1.3.6.1.4.1.1963.5.15.20.1.1.1.2.1
Options: Acceptable values for the lower limit are any number from 200 to 2000 ms.
Default: 300 ms
Acknowledgement Delay Upper Limit
Purpose: When the 5020 sends a message to the DCS 300, the 5020 waits to receive a response
acknowledging the message. If no response is received within the Acknowledgement
Delay Lower Limit time, the 5020 sends the message again at the time interval set for
the lower limit. The 5020 will continue to send the data at increasingly longer intervals
until it reaches the Acknowledgement Delay Upper Limit time. The computer continues
sending the message at the time interval set for the upper limit until a response is
received or a timeout error occurs.
You only use this command in a UDP Plus network.