Intermec 502O, Руководство пользователя

Страница: 236 / 402

5020 Data Collection PC User’s Manual Nugg
Co d e 39
8-34
Controller Connect Check Send Timer
Purpose: During periods of inactivity on the 5020, the PC still sends messages to the DCS 300 to
check the RF or Ethernet connection. The 5020 sends a message at the time interval set
for the Controller Connect Check Send Timer. The timer countdown resets each time a
valid message is sent or received.
You only use this command in a UDP Plus network.
Power Management Tip: Intermec strongly recommends that you use the optimum
setting of 20 seconds.
Configuration: Use one of these methods:
Configuration
Applications
SNMP Bar Codes
Yes Yes No
In the Configuration or Unit Management application, choose Configure and then
Network. Next, choose Protocols, then UDP Plus, and finally choose Connect Send
Timer. For help, see Chapter 3, “Configuring the 5020.”
On Cold Boot: Not saved
SNMP OID: 1.3.6.1.4.1.1963.5.15.20.1.1.1.6.1
Options: Acceptable values for the send timer are any number from 1 to 3600 seconds
(60 minutes).
Default: 20 seconds