8. Click the
Actions
tab to specify the linkage method for when an event occurs.
Select one or more response methods for the system when an alarm is triggered.
See “Linkage methods” on page 37 for details.
9. Click
Save
to save changes.
Face detection
When the face detection function is enabled, the camera can detect a human face that
is moving towards it, triggering a configurable response. The camera can only detect a
face looking directly into the camera, not side views. This feature is best suited when
the camera is in front of a door or is located in a narrow corridor.
To define face detection:
1. From the menu toolbar, click
Configuration
>
Smart Event
>
Face Detection
.
2. Check
Enable Face Detection
to enable the function.
3. Check
Enable Dynamic Analysis
for
Face Detection
if you want the face detected
to be marked with a green frame in live view.
Note:
If you do not want the detected face marked with the green frame, select
Disable
from
Configuration
>
Local Configuration
>
Live View Parameters
>
Rules
.
4. Configure the sensitivity of the face detection. The range is between 1 and 5.
5. Click and drag along the time bars or click on a time bar to configure arming
schedule times.
Note:
All scheduled times are based on the 24-hour clock. Ensure that the correct
time zone and daylight saving time settings have been configured in
Configuration
>
System
>
System Settings
.
6. Click
to copy the schedule to other days by selecting the corresponding check
box next to the day.
7. Click
Save
to save changes.
TruVision Stainless Steel PTZ Camera Configuration Manual
45
