Menu tabs
Description
2
FTP
Enter the FTP address and folder to which camera snapshots can be
uploaded. See page 17 for setup information.
3.
Enter the email address to which messages are sent when an alarm
occurs. See page 18 for setup information.
4.
HTTPS
Specifies authentication of the website and its associated web server,
which protects against Man-in-the-middle attacks.
5.
QoS
QoS (Quality of Service) can help solve network delay and congestion by
configuring the priority of data sending. See page 20 for setup information.
6.
802.1x
When the feature is enabled, the camera data is secured and user
authentication is needed when connecting the camera to the network. See
page 20 for setup information.
To define the SNMP parameters:
1. From the menu toolbar, click
Configuration
>
Network
>
Advanced Settings
>
SNMP
.
2. Select the corresponding version of SNMP: v1, v2c or v3.
3. Configure the SNMP settings. The configuration of the SNMP software should be
the same as the settings you configure here.
4. Click
Save
to save changes.
Note:
Before configuring SNMP, test your SNMP monitoring software and attempt
to receive the camera information via the SNMP port. By setting the Trap Address,
the camera can send the alarm event and exception messages to the SNMP
monitoring software. The SNMP version you select should be the same as that
supported by the SNMP software.
To define the FTP parameters:
1. From the menu toolbar, click
Configuration
>
Network
>
Advanced Settings
>
FTP
.
2. Configure the FTP settings, including the
Server Address
,
Port
,
User Name
,
Password
,
Directory Structure
, and upload type.
Anonymous
: Select this check box to enable anonymous access to the FTP server.
Directory Structure
: Select the
Save in the root directory
,
Save in the parent
directory
, or
Save in the child directory
. When the parent directory is selected,
select
Use Device Name
,
Use Device Number
,
Use Device IP
, or
Custom
(type in
a directory name) for the name of the parent directory. If
Save in the child
directory
is selected, select
Use Camera Name
,
Use Camera Number
, or
Custom
as the name of the child directory.
Snapshot Filing Interval
: Select a number of days to specify how many days of
snapshots should be stored in a single folder. All snapshots are saved to a single
folder in default mode (
OFF
).
Snapshot Name
: Select
Custom Prefix
to change the default snapshot name
prefix. Invalid characters for the custom prefix are as follows: / \ : * ? ‘ “ < >
|
%.
TruVision Stainless Steel PTZ Camera Configuration Manual
17
