Defining a motion detection alarm requires the following tasks:
1.
Area settings
: Define the on-screen area that can trigger a motion detection alarm
and the detection sensitivity level.
2.
Arming schedule
: Define the schedule during which the system detects motion.
3.
Linkage
: Specify the method of response to the alarm (see below).
Trigger
Recording
must be selected to launch recordings to be stored on the SD card or in
NAS.
4.
Normal and advanced configuration
: Normal configuration permits setting the
sensitivity level of the motion detection. Advanced configuration provides more
control over how motion is detected. It permits setting the sensitivity level as well as
the percentage of the motion detection area that the object must occupy, selecting
day or night mode, and setting up eight differently configured defined areas.
5.
Recording schedule
: Define the schedule during which motion detection can be
recorded. See “Recording schedule” on page 50 for further information.
Note:
All scheduled times are based on the 24-hour clock. Ensure that the correct
time zone and daylight saving time settings have been configured in
Configuration
>
System
>
System Settings
.
Linkage methods
The linkage methods available are as follows:
TruVision Stainless Steel PTZ Camera Configuration Manual
37
