Upload Snapshot
: Select this check box to enable the uploading of snapshots to an
FTP server.
Test
: Click
Test
to test the FTP parameters.
3. Click
Save
to save changes.
To set up the email parameters:
1. From the menu toolbar, click
Configuration
>
Network
>
Advanced Settings
>
.
2. Configure the following settings:
Sender
: The name of the email sender.
Sender’s Address
: The email address of the sender.
SMTP Server
: The SMTP Server, IP address, or host name.
SMTP Port
: The SMTP port. The default is 25.
Email Encryption
:
Select
None
,
SSL
, or
TLS
. If the
Enable STARTTLS
check box
is not selected after selecting SSL or TLS, emails are sent after encryption via SSL
or TLS. The SMTP port should be set as 465 for this encryption method. After
selecting SSL or TLS and then selecting
Enable STARTTLS
, emails are sent after
encryption via STARTTLS, and the SMTP port should be set as 25.
Note:
When using STARTTLS, ensure that the protocol is supported by the email
server. If the
Enable STARTTLS
check box is selected when the protocol is not
supported by the email server, email will not be encrypted.
Attached Snapshot
: Select the
Attached Snapshot
check box to send emails with
attached alarm images.
Interval
: This is the time between two actions of sending attached snapshots.
18
TruVision Stainless Steel PTZ Camera Configuration Manual
