Parameter
Description
1. Scene
Indoor, Outdoor, Day,
Night, Morning, Nightfall,
Street, Low Illumination,
Custom1, Custom2
Choose the scene according to the current environment.
Note:
The scene must be set to
Outdoor
to enable local output.
2. Image Adjustment
Brightness, Contrast,
Saturation, Sharpness
Modifies the different elements of picture quality by adjusting the
position of the values for each parameter.
3. Exposure Settings
Exposure Mode
The Exposure Mode can be set to Auto, Iris Priority, Shutter Priority, and
Manual.
Auto
: The iris, shutter and gain values will be adjusted automatically
according to the brightness of the environment.
Iris Priority
: The value of iris needs to be adjusted manually. The
shutter and gain values will be adjusted automatically according to the
brightness of the environment.
Shutter Priority
: The value of shutter needs to be adjusted manually.
The iris and gain values will be adjusted automatically according to the
brightness of the environment.
Manual
: You can adjust the values of Gain, Shutter, and Iris manually.
Limit Gain
This feature is used to adjust the image gain. The value ranges from 0 to
100.
Slow Shutter
The shutter speed controls the length of time that the aperture is open to
let light into the camera through the lens. A slow shutter speed means it
is open for longer. Select On or Off. Default is Off.
Slow Shutter Level
If
Slow Shutter
is enabled, use this feature to adjust the shutter speed.
Default value is Slow Shutter*2.
4. Focus Settings
Focus Mode
If the camera supports an electronic lens, you can set the focus mode
as Manual, Auto or Semi-auto. Default is Semi-auto.
Auto
: The camera focus is adjusted automatically.
Manual
: You can control the lens by adjusting the zoom, focus, lens
initialization, and auxiliary focus via the PTZ control interface. Default is
Manual.
Semi-auto
: The camera focuses automatically only once after panning,
tilting and zooming.
Minimum Focus Distance
This function is used to set the limit of the minimum focus distance. The
value can be set to 10 cm, 50 cm, 1.5 m, 3 m, 6 m, 10 m, or 20 m.
Default is 6 m.
5. Backlight Settings
BLC Area
If you focus on an object against strong backlight, the object will be too
dark to be seen clearly. BLC compensates light to the object in the front
to make it clear. Off, Up, Down, Left, Right, and Center are selectable.
Default is Off.
WDR
When enabled, this feature (wide dynamic range) allows you to see
details of objects in shadows or details of objects in bright areas of
frames that have high contrast between light and dark areas. Default is
24
TruVision Stainless Steel PTZ Camera Configuration Manual
