68
Floppy Disk Drive
The floppy disk drive occupies the lowest front-access device bay.
To replace the floppy disk drive:
WARNING
The system is always on when connected to AC power. Before performing this
task, disconnect the system’s power cord from its AC power outlet.
1.
Disconnect the power and data cables from the drive.
1.
Remove and retain the screws securing the floppy disk drive to its bay.
2.
Slide the drive out the front of the base unit chassis.
3.
Connect the data and power cables to the new floppy disk drive.
4.
Slide the new drive into the base unit chassis.
5.
Secure the new drive to its bay with the screws removed previously.
6.
Replace the faceplate.
Floppy Disk Drive
Power and Data
Cables
Device Screws
(both sides)
