5
9.
Connect cables to ports on any other installed expansion cards as required. See the expansion
card documentation for more information.
CAUTION
Do not connect the system power cord to the base unit or to an AC power outlet at
this time. See “Connecting to AC Power” later in this chapter for more information.
Locating Expansion Cards
Expansion cards are installed as needed in the Accelerated Graphics Port (AGP), Peripheral
Component Interconnect (PCI), and Industry Standard Architecture (ISA) expansion slots.
The following table describes the expansion slots and typical installed expansion cards:
Slot
Type
Typical Expansion Cards Installed
1 (Top)
AGP
Graphics controller
2
PCI
Graphics controller (for multi-card configurations)
3
PCI
Graphics controller (for multi-card configurations)
4
PCI
SCSI controller
5
PCI
Audio controller
6
PCI or ISA
Network controller; audio controller
7 (Bottom)
ISA
Audio controller
NOTE
If a modem card used in the system receives ground from the system, ensure the
system is connected to an earth-grounded AC power outlet.
For information on installing or connecting to expansion cards, see Chapter 9, “Upgrading the
System,” and the expansion card documentation delivered with the system.
Slot 1 AGP
Slot 2 PCI
Slot 3 PCI
Slot 4 PCI
Slot 5 PCI
Slot 6 PCI or ISA
Slot 7 ISA
