1
1
Setting Up the Hardware
This chapter describes how to set up the hardware for your
Zx
1
workstation.
Unpacking the System
CAUTION
Carefully remove items from packaging. Do not drop items on a hard surface. You
may need help to move and place heavy items.
CAUTION
Do not use the lip at the upper rear end of the base unit as a handhold when
removing the system base unit from packaging.
Remove everything from the shipping cartons and verify you have (at a minimum) these items:
♦
Documentation, including Quick Setup, System Guide, System Board Manual, Late-Breaking
News (if provided), and Start Here document for a special-purpose system (if provided)
♦
Operating system software (CD-ROM and diskettes), drivers and other system software
(CD-ROM and diskettes), and documentation
♦
Keyboard, mouse, speakers, and speaker power adapter and cord
♦
System base unit and power cord
♦
Monitor, power cord, and video cable
If any of these items were not delivered, call the Customer Response Center immediately at
1-800-633-7248.
Save the packaging materials. If you need to return equipment for repair, it must be in its original
packaging for you to get warranty service.
If you have already set up the system hardware using Quick Setup, review the rest of this chapter
and then go to Chapter 2, “Setting Up the Software.”
Rear Lip
