Intel R2000WT, Руководство по системной интеграции и обслуживанию

Страница: 108 / 140

Intel
®
Server System R2000WT Product Family System Integration and Service Guide
92
7.3 Replacing the Standard Front Control Panel (R2308WTxxx)
7.3.1 Standard Front Control Panel Removal (R2308WTxxx)
•
Power off the system and remove all power cords
• Remove the system top cover (see section 2.2.1)
•
Remove the air duct (see section 2.3.1)
• Remove the system fan assembly (see section 2.4.1)
•
From the server board, disconnect the Round Black Front Panel USB cable, 14-pin Grey Front Panel
Video ribbon cable, and the 30-pin Grey front panel ribbon cable
• From the hotswap backplane, disconnect the 2x2-pin backplane power cable, all cables connected to the
mini-SAS HD connectors, and the 5-pin I2C cable
•
Identify and remove the bottom four storage drives from the drive bay
• Remove the eight screws from the top of the drive bay (see letter ‘A’)
•
From the back side of the drive bay module, carefully push it out the front of the chassis (see letter ‘B’).
Note: As the module slides out from the chassis, the retention clip found on the front bottom edge of the
drive bay module will disengage. When loose, remove and set it aside for re-installation.
• Remove the screw securing the Control Panel assembly to the drive bay module (see letter ‘A’)
•
Remove the control panel board from the back of the drive bay module (see letter ‘B’)