Intel R2000WT, Руководство по системной интеграции и обслуживанию

Страница: 82 / 140

Intel
®
Server System R2000WT Product Family System Integration and Service Guide
66
3.13 R2208WT… to R2216WT… Upgrade
The R2208WT… 8 x 2.5” server system can be upgraded to a 16 x 2.5” drive system with the addition of one
of several available 8 x 2.5” Front Drive Bay Module accessory kits. Installation of the drive bay module into
the chassis is the same for each. Refer to section 1.3.3 for installation instructions.
Depending on the system configuration requirments, it may also be necessary to install a Intel® RAID
expander card. See section 3.12 for SAS RAID Expander card installation instructions.
3.14 R2208WTxxx / R2216WTxxx to R2224xxx Upgrade
The R2208WT… 8 x 2.5” server system and R2216WT… server system can be upgraded to a 24 x 2.5”
drive system with the addition of several different 8 x 2.5” Front Drive Bay Module accessory kits
available.
In order to upgrade an eight or sixteen drive system to a 24 drive system, the following accessory kits must
be installed:
•
8 x 2.5” Front Drive Bay Module Accessory Kit option (several types available)
• 1U/2U Rack Handle Spare / Accessory Kit (Intel product code A2UHANDLKIT)
•
Intel® RAID Expander Card – Intel product code RES3TV360 (12Gb)
Prepare system for upgrade
• Remove the system cover (see section 2.2.1)
•
Remove the air duct (see section 2.3.1)
•
Remove the system fan assembly (see section 2.4.1)
• Disconnect the front panel cables for the Front USB ports, Front Video port, and Front Control Panel
from the server board ( See Figure 14)
• Disconnect all cables from the 1st (left most) drive bay module